5/2,5/3,5/4 WAY SOLENOID VALVES

"VALCO" MAKE 5/2 WAY INTERNAL PILOT OPERATED POPPET TYPE SOLENOID VALVES ARE POPULARLY & WIDELY USED FOR PNEUMATIC EQUIPMENT FOR ON-OFF OPERATION.
POPPET DESIGNS ARE PREFERRED FOR ITS RELIABLE STURDY PERFORMANCE WITH LESS MOVING PARTS WHICH ENHANCE MILLIONS OF VALVE LIFE CYCLES WITH VERY LESS MAINTENANCE.

SPECIFICATIONS :

• PORT CONNECTIONS : 1/ 4 & 1 /2 BSP (F) / NPT (F)
• VALVES ARE AVALIABLE FROM PRESSURE RANGE OF 1.5 TO 10 BAR
• MOC OF VALVE BODY : ALUMINUM / BRASS / SS 304 & SS 316.
• SEALS CAN BE NBR / VITION / SILICON AS PER APPLICATION
• SOLENOID ENCLOSURES ARE AVALIABLE.
• WITH WEATHERPROOF PROTECTION &
• FLAMEPROOF PROTECTION SUITABLE FOR GR I ,II A & II B
• COIL SUPPLY VOLTAGES.
• 24 V / 110 V / 240 V AC / DC
• COIL CONNECTIONS
• WITH FLYING LEADS
• WITH PLUG IN TYPE 3 PIN CONNECTOR (PG 9 )

WORKING MEDIA :

• AIR

AREA OF APPLICATION :

• TO OPERATE PNEUMATIC CYLINDERS & VARIOUS OTHER ON OFF EQUIPMENTS.

"VALCO" MANUFACTURES 5/2 WAY SOLENOID VALVES WITH 'NAMUR' MOUNTING STANDARDS SUITABLE TO BE USED FOR ACTUATING PNEUMATIC ROTARY ACTUATORS.

SPECIFICATIONS :

The valves can be universally used for any Actuators following NAMUR standard.
• THESE VALVES ARE INTERNAL PILOT OPERATED POPPET TYPE SOLENOID VALVES USED TO OPERATE DOUBLE ACTING ROTARY PNEUMATIC ACTUATORS
• PORT CONNECTIONS : 1/ 4 & 1 /2 -WITH NAMUR STANDARD MOUNTING HOLES
• VALVES ARE AVALIABLE FROM PRESSURE RANGE OF 1.5 TO 10 BAR
• MOC OF VALVE BODY CAN BE ALUMINUM / BRASS / SS 304 & SS 316.
• SEALS CAN BE NBR / VITION / SILICON AS PER APPLICATION
• SOLENOID COILS AVALIABLE ARE OF TYPE SIZE I
• SOLENOID ENCLOSURES ARE AVALIABLE
• WITH WEATHERPROOF PROTECTION &
• FLAMEPROOF PROTECTION SUITABLE FOR GR I,II A & II B
• COIL SUPPLY VOLTAGES
• 24 V / 110 V / 240 V AC / DC
• COIL CONNECTIONS
• WITH FLYING LEADS
• WITH PLUG IN TYPE 3 PIN CONNECTOR (PG 9 )

WORKING MEDIA :

• AIR

AREA OF APPLICATION :

• TO OPERATE CONTROLS DOUBLE ACTING PNEUMATIC ROTARY ACTUATORS.

THESE VALVES ARE OPERATED WITH LEVER PROVIDED WITHOUT ANY SOLENOID.
FINDS LARGE APPLICATION IN TESTING EQUIPMENTS, PACKAGING MACHINES AND VARIOUS APPLICATION. OUR VALVE DOES HAVE A STURDY DESIGN & MANUFACTURED CONSIDERING ITS SUITABILITY FOR A ROUGH HANDLING.

SPECIFICATIONS :

• PORT CONNECTIONS : 1/ 4 & 1 BSP (F) .
• VALVES ARE AVALIABLE FROM PRESSURE RANGE OF 1.5 TO 10 BAR
• MOC OF VALVE BODY : ALUMINUM
• SEALS CAN BE NBR / VITION / SILICON AS PER APPLICATION
• SOLENOID ENCLOSURES ARE AVALIABLE
• WITH WEATHERPROOF PROTECTION &
• FLAMEPROOF PROTECTION SUITABLE FOR GR I,II A & II B
• COIL SUPPLY VOLTAGES
• 24 V / 110 V / 240 V AC / DC
• COIL CONNECTIONS
• WITH FLYING LEADS

WORKING MEDIA :

• AIR

THIS TYPE OF VALVE DESIGN IS BEING USED FOR CONTROL PANEL MOUNTING. SPOOL OF VALVE IS BEING OPERATED WITH PUSH/PULL MECHANISM.
• MOC : Aluminum, Hard anodized
• Port Connections : 1/4 , 1/2 BSP(F)

THESE VALVES ARE WIDELY USED FOR VARIOUS PNEUMATIC MACHINERIES LIKE PLASTICS, PAPER , PACKAGING MACHINES
• MOC : ALUMINUM, HARD ANODIZED
• Port Connections : 1/4 , 1/2 BSP(F)